R1 SPLITTER - LIGHTNING 99'-04'

R1 SPLITTER FOR THE 2ND GEN. LIGHTNINGS. THIS SPLITTER IS FULLY ADJUSTABLE. IT CAN TILT DOWN/UP, RAISE/DROP, AND IN/OUT A TOTAL OF 1" GIVING YOU THE OPTION TO SET IT UP EXACTLY HOW YOU WANT IT!

 

THE SPLITTER REQUIRES YOU TO DRILL 2 HOLES IN THE FRAME AND INSTALL RIVET NUTS WHILE USING 2 EXISTING HOLES IN THE FRONT. THIS ALLOWS 4 HANGERS TO BOLT UP TO THE FRAME WHICH THERE FOR, ALLOWS THE SPLITTER TO BOLT UP TO THE HANGERS. THE ADJUSTMENT RODS ARE NOT REQUIRED AS THE WHOLE PLATE IS BEING SUPPORTED BY THE 4 HANGERS.

 

UNLIKE OTHER SPLITTERS MADE OUT OF PLASTIC, CARBON FIBER, OR FIBER GLASS, THIS ONE IS MADE OUT OF 3/16" THICK ALUMINUM, THE SPLITTER IS VERY STURDY AND HEAVY DUTY. IT IS MEANT TO TAKE A BEATING. YOU WILL NOT HAVE TO WORRY IF YOU SLIGHTLY BUMP INTO A CURB AS YOU WOULD WITH OTHERS. COMING IN AT 30LBS, THE SPLITTER IS NO FEATHER BUT KEEP IN MIND THAT IT WAS DESIGN FOR THE DAILY DRIVERS OUT THERE WHO ARE NOT AFRAID TO PUT SOME ABUSE ON THEIR RIDES.

 

EVERYTHING NEEDED FOR A COMPLETE INSTALL INCLUDING ALL HARDWARE. RIVET NUTS, BOLTS, WASHERS, NUTS, DRILL BITS WILL BE PROVIDED. SUPPORT RODS INCLUDED!

R1 SPLITTER - LIGHTNING 99'-04'

SKU: SKU R1-SPLR-2-L
$390.00Price
    • PLEASE ALLOW 3-5 DAYS FOR TURN AROUND TIME.
    • SOME SCRATCHES WILL BE SHOWN DUE TO MATERIAL HANDLING. IT IS UP TO YOU OR YOUR PAINTER TO REMOVE THEM. IF POWDER COATING IS AN OPTION, IT IS RECOMMENDED TO HAVE THE SPLITTER SANDBLASTED AS THIS WILL NOT ONLY REMOVE ALL SCRATCHES BUT IT WILL ALSO PROVIDE THE BEST PAINT ADHESION SURFACE.

© 2020 K-DESIGNS

0
  • White Instagram Icon