R1 2.0 SPLITTER - LIGHTNING 99'-04'

R1 SPLITTER FOR THE 2ND GEN. LIGHTNINGS. THIS SPLITTER IS FULLY ADJUSTABLE. IT CAN TILT DOWN/UP, RAISE/DROP, AND IN/OUT A TOTAL OF 1" GIVING YOU THE OPTION TO SET IT UP EXACTLY HOW YOU WANT IT!

 

**2.0**

 

THE 2.0 SPLITTER IS A LIGHTER VERSION OF THE REGULAR R1. THE OUTER EDGE IS IDENTICAL TO THE R1 WITH THE ADDITION OF SIDE FINS

 

THE SPLITTER REQUIRES YOU TO DRILL 2 HOLES IN THE FRAME AND INSTALL RIVET NUTS WHILE USING 2 EXISTING HOLES IN THE FRONT. THIS ALLOWS 4 HANGERS TO BOLT UP TO THE FRAME WHICH THERE FOR, ALLOWS THE SPLITTER TO BOLT UP TO THE HANGERS. THE ADJUSTMENT RODS ARE NOT REQUIRED AS THE WHOLE PLATE IS BEING SUPPORTED BY THE 4 HANGERS.

 

EVEN THOUGH THE SPLITTER IS NOT AS HEAVY AS THE REGULAR R1, THE SPLITTER IS YET VERY STURDY AND DURABLE!

 

EVERYTHING NEEDED FOR A COMPLETE INSTALL INCLUDING ALL HARDWARE. RIVET NUTS, BOLTS, WASHERS, NUTS, AND DRILL BITS ARE PROVIDED. SPLITTER SUPPORT RODS INCLUDED!

R1 2.0 SPLITTER - LIGHTNING 99'-04'

SKU: SKU R1 2.0-SPLR-2-L
$415.00Price
    • PLEASE ALLOW 3-5 DAYS FOR TURN AROUND TIME.
    • SOME SCRATCHES WILL BE SHOWN DUE TO MATERIAL HANDLING. IT IS UP TO YOU OR YOUR PAINTER TO REMOVE THEM. IF POWDER COATING IS AN OPTION, IT IS RECOMMENDED TO HAVE THE SPLITTER SANDBLASTED AS THIS WILL NOT ONLY REMOVE ALL SCRATCHES BUT IT WILL ALSO PROVIDE THE BEST PAINT ADHESION SURFACE.

© 2020 K-DESIGNS

0
  • White Instagram Icon